PEAK 2034 accessories

Interchangeable objectives
The 2034, 2054 and 2054-EIM series let the magnification be changed by swapping the objective. The standard carrying cases already have four recesses for transporting the interchangeable optics safely. The objectives screw in, so changing them is easy. The measuring scales, however, deserve particular attention: if a microscope at 100x is used with a 0.01 mm scale, the measurement will be wrong once the objective is changed. An additional objective for measuring must therefore be paired with the matching eyepiece. For purely optical inspection, changing the eyepiece is not necessary.

Interchangeable eyepieces with a millimetre scale
Every eyepiece magnifies 10x. The internal scale is calculated for the matching objective. The scale can be focused separately within the eyepiece. An eyecup is already included with a bench microscope when ordered.

Interchangeable eyepieces with an inch scale
Eyepieces with inch scales are held in stock. They can be ordered for microscopes magnifying from 20x to 200x.

MKH stand

The MKH special stand suits the 2034, 2034-EIM, 2054 and 2054-EIM series. Used on cylinders, on convex surfaces or together with a digital camera, it holds the microscope steady. The contact rollers are covered in a silicone-free material. The microscope screws into the stand with a cap nut. As a special version, the MKH stand is also supplied with rolling contact cylinders.

MST-X stand
A further option is X-axis movement on the MST stand. Its 5 mm of travel helps at high magnifications when measuring points that sit next to one another. X-axis movement is not possible together with the rolling contact cylinders.

MST-ZX stand
The stand for the 2034-CIL-ZX depth microscope can also be used with the 2034 series. Besides 5 mm of movement in the X axis, the stand allows precise focusing by a worm drive. To be used with the MST-ZX, the microscope bodies need modifying; the modification is included in the price of the stand.

CV-Mini-2034 stand
The CV-Mini 2034 stand is for non-contact inspection and measurement. The aluminium boom arm rotates 360° about a stainless-steel shaft, and carries a built-in fine positioning adjustment. The 20 mm aluminium base plate is anodised and measures 230 × 150 mm; larger base plates can be made to special order. Microscope and stand are supplied together in a smart plastic carrying case (only when the complete system is ordered).

ST-CIL stand
A precision stand with segmented columns that can be mounted at whatever spacing is needed. It carries a cross stage with two measuring spindles of 25 mm graduated to 0.01 mm. The ST-CIL is used when a 2034 or 2054 microscope is combined with the MST stand. The MST stand is optionally offered with an additional rotary stage.

LHM-A aluminium lamp holder
A precisely made holder, supplied together with a Mini Maglite torch, for work where the ordinary plastic lamp holder will not do. In hard industrial use a microscope will hit the floor more than once; this holder survives it. Inside are two rings that position the Maglite precisely without damaging it, and two stainless knurled screws set its angle exactly.